Here’s a small project to replace a handle on a Chinese-style ladle. The handle I had to replace was a cheap bit of pine pushed in to the metal part of the ladle. Instead of trying to replicate that, I decided to make a handle that would house the ladle. So I grabbed a scrap of walnut, cut it down to size with my rip saw, and then scratched my head for a while figuring out how to secure it.
My solution was to first drill the hole that would house the ladle. I locked it in my vise and used a brace I recently picked up for a few bucks to drill the hole. I also got an auger file recently and had just sharpened up some bits I had also picked up at the local flea market … so I was eager to try it out. It worked surprisingly well.
Then I took a length of ¾” oak dowel and used a spokeshave to shave it down a bit so I could mount the new handle on the face of my workbench to work on it. I shaped the handle with spokeshave, chisels, and a file.
This is the handle in rough form mounted on a dowel. I used a chisel to slim it down.
Then I worked on it with the spokeshave.
I tapered it with the spokeshave, then smoothed out the rough edges with a file and chamfered the edges with a chisel. I finished it off with some flexible sand paper.
And here it is attached the to ladle.